Canon imageCLASS MF273dw User Manual Download Page 260

Page: 260 / 633

Additional Copying Features (Touch Panel Model)

94LS-06R

In addition to basic copy settings, the machine also has settings for 2-sided copying, image quality adjustment, and

other settings according to your original and purpose. Use the copy screen to configure these settings.

* To make copies using the ID Card Copy function, you can simply adjust the density and image quality.

Making 2-sided Copies(P. 251)
Copying Multiple Originals onto One Sheet (N on 1)(P. 252)
Collating Copies by Page (Collate)(P. 253)
Adjusting the Density(P. 254)
Adjusting the Image Quality(P. 255)

Changing the Default Settings

●

You can also change the default copy settings. Changing the Default Settings(P. 167)

Basic Copy Operations

●

For the basic operations when copying, see the following:

Copy Operations(P. 247)

Making 2-sided Copies

You can copy two 1-sided originals on both sides of one sheet of paper.

You can also copy a 2-sided original on both sides of one sheet of paper, or on two separate sheets of paper.

* 2-sided copying may not be available with some sizes and types of paper. Usable Paper(P. 20)

Press [2-Sided] on the copy screen.

➠

The [2-Sided] screen reappears.

Press [1->2-Sided].

➠

The copy screen reappears.

Copying

251

Summary of Contents for imageCLASS MF273dw


























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for imageCLASS MF273dw

Reviews:

Related manuals for imageCLASS MF273dw

Brands by name

Popular brands

Canon imageCLASS MF273dw, User Manual

Search results

Summary of Contents for imageCLASS MF273dw

Reviews:

Related manuals for imageCLASS MF273dw

Brands by name

Popular brands