Canon imageCLASS MF273dw User Manual Download Page 264

Page: 264 / 633

Adjusting the Image Quality

You can adjust the image quality such as when the copied image is not clear or the text is difficult to read. You can also

erase dark borders and shadows that appear around the edges of the original when copying.

* Erase Frame is not available when making copies using the ID Card Copy function.

◼

Selecting the Image Quality for the Original Type

Press [Original Type] on the copy screen.

➠

The [Original Type] screen is displayed.

Select the original type.

➠

The copy screen reappears.

When Copying Originals with Both Text and Photos

Select [Text/Photo (High Speed)] or [Text/Photo (Quality)].

Giving Priority to Speed over Image Quality
Place the original in the feeder, and select [Text/Photo (High Speed)].

Giving Priority to Image Quality over Speed
Select [Text/Photo (Quality)], adjust to make text or photos more visible, and press [Apply].

Copying Photos Containing Halftone Dots such as in Magazines

Select [Photo].

Copying Originals with Large Volumes of Text such as Research Papers

Select [Text].

◼

Erasing Dark Borders and Shadows around Edges of the Original (Erase Frame)

This function erases the dark borders and shadows that appear around the edges in the copied image when copying

originals that are smaller than the paper size or thick originals.

* This cannot be set at the same time as N on 1.

Press [Erase Frame] on the copy screen.

➠

The [Erase Frame] screen is displayed.

Press [On].

➠

The screen for specifying the frame width to erase is displayed.

Enter the frame width to erase, and press [Apply].

➠

The [Scan Size] screen is displayed.

Copying

255

Summary of Contents for imageCLASS MF273dw


























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for imageCLASS MF273dw

Reviews:

Related manuals for imageCLASS MF273dw

Brands by name

Popular brands

Canon imageCLASS MF273dw, User Manual

Search results

Summary of Contents for imageCLASS MF273dw

Reviews:

Related manuals for imageCLASS MF273dw

Brands by name

Popular brands