Canon imageclass LBP251dw User Manual Download Page 399

Page: 399 / 495

Exterior

0W20-065

Regularly wipe the exterior of the machine, especially around the ventilation slots, to keep the machine in good

condition.

Turn OFF the machine, and unplug the power cord from the AC power outlet.

●

When you turn OFF the machine, data that is waiting to be printed is deleted.

Clean the exterior of the machine and the ventilation slots.

●

Use a soft, well-wrung-out cloth dampened with water or a mild detergent diluted with water.

●

To locate the ventilation slots, see Front Side(P. 17) and Back Side(P. 19) .

Wait for the exterior of machine to dry completely.

Reconnect the power cord and turn ON the machine.

Maintenance

393

Summary of Contents for imageclass LBP251dw
















































































































































































































































































































































































































































































































Search results

Summary of Contents for imageclass LBP251dw

Reviews:

Related manuals for imageclass LBP251dw

Brands by name

Popular brands

Canon imageclass LBP251dw, User Manual

Search results

Summary of Contents for imageclass LBP251dw

Reviews:

Related manuals for imageclass LBP251dw

Brands by name

Popular brands