Canon ImageCLASS 2300, Sending Manual

Page: 14 / 139

Preparation Before Use 1-3
Ov
er
vie
w
1
Preparation Before Use
Before using I-Fax, it is necessary to specify the following settings from the
machine's control panel.
1. Network Settings
2. Mail Transmission/Reception Settings
3. Registering mail addresses in one-touch speed dialing and coded speed dialing.
■
Network Settings
Specify the machine's parameters in the network. To transmit/receive data using I-Fax on
the network, specify settings for the TCP/IP communication protocol. (See "Setting the
Network," on p. 2-1.)
■
Mail Transmission/Reception Settings
Specify settings of a subject, message text, signature, etc. for each registered mail
address. Also, specify items related to e-mail transmission and reception. (See
"Specifying Mail Basic Items," on p. 3-2.) For values of the network settings, contact a
network administrator.
■
Registering Mail Addresses in the One-Touch/Coded Speed Dialing
Register mail addresses, so that you can transmit mail with I-Fax by specifying the
destinations with one-touch/coded speed dialing or access code. You can also register the
transmission start time, transmission mode, etc., as well as the mail addresses in each
one-touch or coded speed dial address. (See "Registering Destinations (Mail
Addresses)," on p. 4-5.)