Canon ImageCLASS 2300 Network Manual Download Page 83

Page: 83 / 102

How to Uninstall Software

6-6

Appendix

How to Uninstall Software

To uninstall the LPR Port utility or NetBIOS/NetBEUI Port Monitor utility in Windows
95/98/Me, follow the procedure below.

NOTE

To uninstall

NetSpot Console or NetSpot Device Installer, see the NetSpot Console or

NetSpot Device Installer Readme file for details.

LPR Port Utility Deletion

Set [Print Destination Port] of the printer driver to a port other
than the Canon LPR Port.

The print destination port can be set using the [Details] sheet in the printer
Properties dialog box.

The Canon LPR Port is displayed on the screen in a format such as
<172.20.88.125@LP (Canon LPR Port)>.

Insert the Network User Software CD-ROM provided with the
machine into the CD-ROM drive.

Double-click [Uninstlp] in the Lprport folder on the CD-ROM.

Follow the instructions on the screen to uninstall the LPR Port
Utility.

Summary of Contents for ImageCLASS 2300







































































































Search results

Summary of Contents for ImageCLASS 2300

Reviews:

Related manuals for ImageCLASS 2300

Brands by name

Popular brands

Canon ImageCLASS 2300, Network Manual

Search results

Summary of Contents for ImageCLASS 2300

Reviews:

Related manuals for ImageCLASS 2300

Brands by name

Popular brands