Canon Image Runner 1600 Series, Manual

Page: 16 / 84

Placing Originals 1-8
1
Basic Cop
ying F
eatures
Orientation
You can place original either vertically or horizontally. Always align the top edge of
your original with the back edge of the platen glass (by the arrow in the top left
corner), or with the back edge of the feeder.
Platen glass
Vertical placement Horizontal placement
Feeder
Staple copy: place the original face up
Vertical placement Horizontal placement
IMPORTANT
The copies are stapled at the part equivalent to the upper left side of the original.
NOTE
• If the top edge of the original is not aligned with the back edge of the platen glass, prints
may not be made correctly, depending on the mode you have set.
• The scanning speed for horizontally placed originals is somewhat slower than for
vertically placed originals. You can place originals horizontally when scanning with Preset
Zoom mode, such as when enlarging LTR
to 11"
✕
17" .
• Horizontally placed STMT and LTR originals are referred to as STMT and LTR .
• 11"
✕
17" and LGL originals must be placed horizontally.
Original
(face down)
Copies are stapled here.
Original (face down)
Copies are stapled here.
ABC
Original
(face up)
Copies are stapled here.
ABC
Original
(face up)
Copies are stapled here.