Canon image Prograf iPF785 Series, Basic Manual

Page: 114 / 136

Cause Corrective Action
When Detect Mismatch in the Control Pan-
el menu is set to Pause , the type of paper
loaded does not match the type specified in
the printer driver.
2.
Replace the loaded paper with paper of the type and size you have specified in
the printer driver.
(See "Loading and Printing on Rolls.")
➔
User's Guide
(See "Loading and Printing on Sheets.")
➔
User's Guide
Press ▲ or ▼ to select Print , and then press the OK button to resume printing.
However, note that this error may cause paper jams and affect the printing quality.
When Detect Mismatch in the Control Pan-
el menu is set to Warning , the type of pa-
per loaded does not match the type speci-
fied in the printer driver.
You can continue to print, but note that this error may cause paper jams or problems
in the printing results.
The paper is too small.
The paper is too small.
Cause Corrective Action
When Detect Mismatch in the Control
Panel menu is set to Pause , paper small-
er than the size specified in the printer
driver is loaded.
Press ▲ or ▼ to select Print , and then press the OK button to resume printing.
However, note that this error may cause paper jams and affect the printing quality.
Adjust the paper size setting in the printer driver to match the size loaded in the printer
as follows.
1. Press ▲ or ▼ to select Stop Printing , and then press the OK button.
2.
Change the paper size setting in the printer driver to the size loaded in the printer
and try printing again.
Replace the loaded paper with paper of a size that matches the size setting in the
printer driver as follows.
1. Press ▲ or ▼ to select Change Paper , and then press the OK button to stop print-
ing.
2.
Replace the loaded paper to match the settings in the printer driver and try printing
again.
(See "Loading and Printing on Rolls.")
➔
User's Guide
(See "Loading and Printing on Sheets.")
➔
User's Guide
When Detect Mismatch in the Control
Panel menu is set to Warning , paper
smaller than the size specified in the print-
er driver is loaded.
You can continue to print, but note that this error may cause problems in the printing
results.
The paper is too small. The paper is too small.
" Replace paper with A4/LTR (vertical) or larger "
Cause Corrective Action
The loaded paper is too small. Replace the paper with paper of A4/Letter (vertical) size or larger as follows.
1. Press ▲ or ▼ to select Change Paper , press the OK button, and remove the paper.
(See "Removing Sheets.")
➔
P.23
2.
Switch to paper A4/Letter (vertical) or larger.
(See "Loading and Printing on Sheets.")
➔
User's Guide
The printer will resume printing.
Press ▲ or ▼ to select Stop Printing , and then press the OK button.
" Replace roll with 10 in. wide or larger roll. "
Cause Corrective Action
The loaded paper is too small. Replace the roll with a roll 10 inches in width or larger as follows.
The paper is too small.
iPF785 Series
Basic Guide
Error Message
Messages regarding paper
114