2
EN
GLISH
Setting Up
1 Preparing the Printer
1
Take the printer out of the box as
shown.
Hold the box firmly when taking out the printer.
2
Place the printer on a flat surface.
3
Remove the packing material and tape
from the printer as shown.
The tape position is subject to change.
2 Connecting the Printer to the Computer
Use a USB cable or a FireWire cable. This printer has two types of USB ports and a FireWire 400 port.
• USB 2.0 Hi-Speed port (the upper USB port)
Connect to this port only when using the following systems:
-
Computer on which Windows XP or Windows 2000 is running and that has a USB 2.0 Hi-Speed port.
-
Macintosh series computer on which Mac OS X v.10.2.7 or later is running and that has an internal USB
2.0 Hi-Speed port.
Ensure that USB cables also support USB 2.0 Hi-Speed.
To determine whether your computer supports USB 2.0 Hi-Speed, refer to its manual or contact its
manufacturer.
• USB 2.0 Full Speed port (the lower USB port)
Connect to this port when your computer or your cables do not support USB 2.0 Hi-Speed or when it
is not clear whether they support it.
• FireWire 400 port
Connect to this port only when your computer has a FireWire 400 port and is running Mac OS 9.0.4
to 9.x, or Mac OS X v.10.2.1 or later.
USB cable
FireWire cable
i9900_i9950_QSG.fm Page 2 Friday, January 9, 2004 3:59 PM
Summary of Contents for i9900 Series
Page 30: ...28 ENGLISH ...
