manualshive.com logo in svg

Canon i-SENSYS D450d, Service Manual, Page: 45 / 182

Share
Download
Canon i-SENSYS D450d Service Manual Download Page 45

Chapter 3

3-3

3.2 Parts Replacement Procedure

3.2.1 Scanner Unit

3.2.1.1 Preparation for Removing the Scanner Unit

0020-2576

i-SENSYS MF4300dn / i-SENSYS MF4350d / i-SENSYS MF4380dn / i-
SENSYS MF4310/4318 / i-SENSYS MF4320d / i-SENSYS MF4330d / i-
SENSYS MF4340d / i-SENSYS D450d / i-SENSYS MF4370dn

1) Remove the front cover.

(page 9-2)

Reference[Removing the Front Cov-

er]

2) Remove the right cover.

(page 9-2)

Reference[Removing the Right Cov-

er]

3) Remove the left cover.

(page 9-3)

Reference[Removing the Left Cover]

4) Remove the rear cover.

(page 9-2)

Reference[Removing the Rear Cover]

3.2.1.2 Removing the Scanner Unit

0020-2577

i-SENSYS MF4300dn / i-SENSYS MF4350d / i-SENSYS MF4380dn / i-
SENSYS MF4310/4318 / i-SENSYS MF4320d / i-SENSYS MF4330d / i-
SENSYS MF4340d / i-SENSYS D450d / i-SENSYS MF4370dn

1) Disconnect the 6 connectors [1], and remove the 1 screw [2] of the ground-

ing wire.

F-3-2

2) Remove the ferrite core [1] and the 2 flat cables [2] from the cable guide

[3].

F-3-3

3) Open the scanner unit [1] to remove in the direction of the arrow.

F-3-4

3.2.2 Reader Motor

3.2.2.1 Preparation for Removing the Flat Bed Motor

0020-3067

i-SENSYS MF4300dn / i-SENSYS MF4350d / i-SENSYS MF4380dn / i-
SENSYS MF4310/4318 / i-SENSYS MF4320d / i-SENSYS MF4330d / i-
SENSYS MF4340d / i-SENSYS D450d / i-SENSYS MF4370dn

1) Remove the front cover.

(page 9-2)

Reference[Removing the Front Cov-

er]

2) Remove the right cover.

(page 9-2)

Reference[Removing the Right Cov-

er]

3) Remove the left cover.

(page 9-3)

Reference[Removing the Left Cover]

4) Remove the rear cover.

(page 9-2)

Reference[Removing the Rear Cover]

5) Remove the scanner unit.

(page 3-3)

Reference[Removing the Scanner

Unit]

3.2.2.2 Removing the Flat Bed Motor

0020-3066

i-SENSYS MF4300dn / i-SENSYS MF4350d / i-SENSYS MF4380dn / i-
SENSYS MF4310/4318 / i-SENSYS MF4320d / i-SENSYS MF4330d / i-
SENSYS MF4340d / i-SENSYS D450d / i-SENSYS MF4370dn

1) Open the copyboard cover unit [1] to remove upward.

Pull out the hinge [2] on the left side while keeping it tilted toward the
back.

In the case of ADF

F-3-5

In the case of DADF

[1]

[1]

[2]

[1]

[1]

[3]

[2]

Place the detached copyboard glass cover on cloth etc. not to damage the 
bottom sheet.

[1]

[1]

[2]

Summary of Contents for i-SENSYS D450d























































































































































































Reviews:

No comments