manualshive.com logo in svg

Canon i-SENSYS D450d, Service Manual, Page: 116 / 182

Share
Download
Canon i-SENSYS D450d Service Manual Download Page 116

Chapter 9  

9-4

F-9-13

9.3.5 Upper Cover

9.3.5.1 Preparation for Removing the Upper Cover

0020-2729

i-SENSYS MF4300dn / i-SENSYS MF4350d / i-SENSYS MF4380dn / i-
SENSYS MF4310/4318 / i-SENSYS MF4320d / i-SENSYS MF4330d / i-
SENSYS MF4340d / i-SENSYS D450d / i-SENSYS MF4370dn

1) Remove the front cover.

(page 9-2)

Reference[Removing the Front Cov-

er]

2) Remove the right cover.

(page 9-2)

Reference[Removing the Right Cov-

er]

3) Remove the left cover.

(page 9-3)

Reference[Removing the Left Cover]

4) Remove the rear cover.

(page 9-2)

Reference[Removing the Rear Cover]

5) Remove the scanner unit.

(page 3-3)

Reference[Removing the Scanner

Unit]

6) Remove the printer cover.

(page 9-4)

Reference[Removing the Printer

Cover]

9.3.5.2 Removing the Upper Cover

0020-2730

i-SENSYS MF4300dn / i-SENSYS MF4350d / i-SENSYS MF4380dn / i-
SENSYS MF4310/4318 / i-SENSYS MF4320d / i-SENSYS MF4330d / i-
SENSYS MF4340d / i-SENSYS D450d / i-SENSYS MF4370dn

1) Remove the 4 screws [1], and detach the upper cover [2].

F-9-14

9.3.6 Cartridge Cover

9.3.6.1 Preparation for Removing the Printer Cover

0020-2731

i-SENSYS MF4300dn / i-SENSYS MF4350d / i-SENSYS MF4380dn / i-
SENSYS MF4310/4318 / i-SENSYS MF4320d / i-SENSYS MF4330d / i-
SENSYS MF4340d / i-SENSYS D450d / i-SENSYS MF4370dn

1) Remove the front cover.

(page 9-2)

Reference[Removing the Front Cov-

er]

2) Remove the right cover.

(page 9-2)

Reference[Removing the Right Cov-

er]

3) Remove the left cover.

(page 9-3)

Reference[Removing the Left Cover]

4) Remove the rear cover.

(page 9-2)

Reference[Removing the Rear Cover]

5) Remove the scanner unit.

(page 3-3)

Reference[Removing the Scanner

Unit]

9.3.6.2 Removing the Printer Cover

0020-2732

i-SENSYS MF4300dn / i-SENSYS MF4350d / i-SENSYS MF4380dn / i-
SENSYS MF4310/4318 / i-SENSYS MF4320d / i-SENSYS MF4330d / i-
SENSYS MF4340d / i-SENSYS D450d / i-SENSYS MF4370dn

1) Open the printer cover [1].
2) Remove the link stopper [2].
3) Remove the 2 pressure release levers [3] through the 2 holes [4].

F-9-15

4) With the printer cover [1] opened, detach it upward.

F-9-16

9.3.7 Operation Panel Unit

9.3.7.1 Removing the Control Panel Unit

0020-2733

i-SENSYS MF4300dn / i-SENSYS MF4350d / i-SENSYS MF4380dn / i-
SENSYS MF4310/4318 / i-SENSYS MF4320d / i-SENSYS MF4330d / i-
SENSYS MF4340d / i-SENSYS D450d / i-SENSYS MF4370dn

1) Remove the 4 screws [1] and the 2 claws [2].

[3]

[2]

[2]

[2]

[1]

[1]

[1]

[2]

 

Points to Note When Attaching

Make sure to attach the link stopper [2] after attaching the right cover. If 
attaching the link stopper while attaching the printer cover, it may drop 
inside the machine.

[3]

[3]

[4]

[4]

[2]

[1]

[1]

Summary of Contents for i-SENSYS D450d























































































































































































Reviews:

No comments