manualshive.com logo in svg

Canon i-SENSYS D450d, Service Manual, Page: 127 / 182

Share
Download
Canon i-SENSYS D450d Service Manual Download Page 127

Chapter 10

10-3

F-10-2

[1] DADF separation roller unit

Open the DADF and wipe off the smudge with the soft dry cloth.

[2] DADF separation pad

Open the DADF and wipe off the smudge with the soft dry cloth.

[3] Document delivery roller

Wipe off the smudge with the soft dry cloth.

[4] Backside of copyboard cover

Open the copyboard cover and wipe off the smudge with the soft dry cloth.

[5] Copyboard glass

Open the copyboard cover and wipe off the smudge with the soft dry cloth.

[6] DADF reading area

Open the copyboard cover and wipe off the smudge with the soft dry cloth.

10.3.4 Cleaning Method (Pressure Roller)

0020-2750

i-SENSYS MF4300dn / i-SENSYS MF4350d / i-SENSYS MF4380dn / i-SENSYS MF4310/4318 / i-SENSYS MF4320d / i-SENSYS MF4330d / i-SENSYS
MF4340d / i-SENSYS D450d / i-SENSYS MF4370dn

MEMO:
Cleaning the roller takes approximately 130 seconds.

1) Press [Additional Functions].
2) Press [<-] or [+>] to select <ADJUST./CLEANING>, then press [OK].
3) Load a sheet of blank A4 paper (standard paper) in the multi-purpose tray.

F-10-3

4) Press [<-] or [+>] to select <FIX. UNIT CLEANING>, then press [OK].

Cleaning starts. When finished, the display returns to standby mode.

[1]

[2]

[3]

[4]

[5]

[6]

Summary of Contents for i-SENSYS D450d























































































































































































Reviews:

No comments