manualshive.com logo in svg

Canon GP335, Service Manual

Share
Download
Canon GP335 Service Manual Download Page 610

CHAPTER 14  TROUBLESHOOTING

14-192

COPYRIGHT © 1999 CANON INC.

CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

<CCD>

FUNCTION

Level 3

MAN-ADJ

Remarks

Description

Executes shading auto correction.

Execute this mode after replacing the CCD PCB,
scanning lamp, DC controller PB, image processor PCB,
or standard white plate.

The VR on the DC controller PCB must be turned during
execution; be sure to remove the rear cover and locate the
VR on the DC controller PCB in advance.
During adjustment, SERVICE will be indicated in the
upper right corner of the screen.

n

Operation

1) Place five or more sheets of standard white paper on the

cupboard glass.

2) Select <MAN-ADJ> to highlight; then, press the OK key.
3) Check that the machine starts auto adjustment mode,

and the screen indicates the following:
AD -> CLANP -> VOL

4) When a beep is heard while VOL is indicated, press the

OK key on the screen.
If no beep is heard in several seconds, turn VR200 on
the DC controller PCB so that a beep is heard; then,
press the OK key.

5) Check that the screen indicates the following after

VOL-OK; at the end, it indicates END.
GAIN 

→

 CLANP2 

→

 DARK 

→

 SHADING

* The whitest of all used by the user (except paper for a color copier).

White paper

Summary of Contents for GP335











































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands