Canon GP335, Service Manual

Page: 270 / 682

CHAPTER 8 PAPER DECK
8-36
COPYRIGHT © 1999 CANON INC. CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
D. Feeding System
1. Removing the Deck Pick-Up Unit
1) Remove the upper cover. (See p. 8-23.)
2) Disconnect the two connectors [1], and
remove the five screws [2].
3) Remove the deck pick-up unit [3].
Figure 8-339
Figure 8-338
Caution:
When mounting the deck pick-up unit
[3], be sure to tighten the three screws
shown in Figure 8-339 first.
2. Removing the Deck Pick-Up Roller
1) Remove the deck pick-up unit. (See p. 8-
36.)
2) Turn over the deck pick-up unit, and
remove the resin ring [1] (one each); then,
detach the deck pick-up rollers [2].
Figure 8-340
3. Orientation of the Deck Pick-Up
Roller
When mounting the deck pick-up roller
[1] at the front, be sure that the marking [2] on
the collar (silver) is toward the front and the
marking [3] on the side of the roller is toward
the rear.
Figure 8-341
[1]
[2]
[2]
[2]
[3]
Screws
[3]
[2]
[1]
Direction of rotation
Collar (silver)
(front)
[2]
[3]
[1]