manualshive.com logo in svg

Canon GP335, Service Manual

Share
Download
Canon GP335 Service Manual Download Page 362

CHAPTER 12  INSTALLATION

12-4

COPYRIGHT © 1999 CANON INC.

CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

A.  Unpacking and Removing the Fixing Materials

Here, the machine is a model equipped with a DADF as standard.

No.

1

2

3

4

Remarks

•

If you are installing the machine on a cassette
pedestal, keep in mind that the vertical path assembly
of the pedestal is designed for installation after
installation of the machine.

•

Remove all tape from the covers and from inside the
cassette.

Check to make sure that none of the following is missing:

n

Inside the Cardboard Box

•

Copy tray

• Installation Procedure

•

Grounding cord

• Lower left cover (rear)

•

Drum unit

•

Screw for lower right cover

• DADF delivery tray unit

•

Lower right cover (rear)

• Lower left cover (front)

•

Toner

•

User's Manual (copying)

n

Taped On the DADF Top

•

Stepped screw

•

Stamp

Work

Unpack the machine, and remove
the plastic sheets.
If you are installing a cassette
pedestal, unpack the pedestal also.

Holding the grips of the machine
(working in a group of two), place
it on the cassette pedestal.

Open the cardboard box that comes
with the machine, and take out the
parts and attachments.

Mount the lower left cover (rear).
•

Mount the hook at the bottom;
then, push in the snap at the top.

Grips

Grips

Claw

Hook

Lower left cover (rear)

Summary of Contents for GP335











































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands