manualshive.com logo in svg

Canon g3000 series, Online Manual, Page: 783 / 852

Share
Download
Canon g3000 series Online Manual Download Page 783

If you are using a USB cable, make sure it is securely connected to both the machine and the computer. When
the USB cable is securely plugged in, check the following:

• If you are using a relay device such as a USB hub, disconnect it, connect the machine directly to the

computer, and retry the printing. If printing starts normally, there is a problem with the relay device.
Contact the vendor of the relay device.

• There could also be a problem with the USB cable. Replace the USB cable and retry the printing.

If you use the machine over a LAN, make sure the machine is correctly set up for network use.

Check4

 Make sure MP Drivers are installed correctly.

Uninstall the MP Drivers following the procedure described in 

Deleting the Unnecessary MP Drivers

 and

reinstall them from the Setup CD-ROM or the Canon website.

Check5

 When machine is connected to your computer with a USB cable, check

device status from your computer.

Follow the procedure below to check the device status.

1. Open the Device Manager on your computer as shown below.

If the 

User Account Control

 screen appears, follow the on-screen instructions.

• In Windows 10, right-click 

Start

 button and select 

Device Manager

.

• In Windows 8.1 or Windows 8, select 

Control Panel

 from 

Settings

 charm on 

Desktop

 > 

Hardware

and Sound

 > 

Device Manager

.

• In Windows 7 or Windows Vista, click 

Control Panel

, 

Hardware and Sound

, and 

Device Manager

.

• In Windows XP, click 

Control Panel

, 

Performance and Maintenance

, 

System

, and 

Device

Manager

 on 

Hardware

 sheet.

2. Double-click 

Universal Serial Bus controllers

 and 

USB Printing Support

.

If the 

USB Printing Support Properties

 screen does not appear, make sure the machine is correctly

connected to the computer.

Check3

 

Make sure machine is properly connected to computer.

3. Click 

General

 tab and check for a device problem.

If a device error is shown, see Windows Help to resolve it.

Other Error Messages (Windows)

Check

 If an error message appears outside printer status monitor, check the

following:

• "

Could not spool successfully due to insufficient disk space

"

Delete any unnecessary files to increase the amount of free space on the disk.

• "

Could not spool successfully due to insufficient memory

"

783

Summary of Contents for g3000 series





















































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments