Canon G2010 Series Online Manual Download Page 289

Page: 289 / 296

2900

Cause

Scanning print head alignment sheet failed.

What to Do

Press the printer's

Black

Color

button and check the following.

• Make sure the print head alignment sheet is set in the correct position and orientation on the platen

glass.

• Make sure the platen glass and the print head alignment sheet are not dirty.
• Make sure the loaded paper is correct.

For print head alignment, load A4 or Letter-sized plain paper.

• Make sure the print head nozzle is not clogged.

Check the print head condition by printing the nozzle check pattern.

After checking the above, start over auto print head alignment from the beginning.

If the error is still not resolved, try manual print head alignment.

289

Summary of Contents for G2010 Series









































































































































































































































































































Search results

Summary of Contents for G2010 Series

Reviews:

Related manuals for G2010 Series

Brands by name

Popular brands

Canon G2010 Series, Online Manual

Search results

Summary of Contents for G2010 Series

Reviews:

Related manuals for G2010 Series

Brands by name

Popular brands