manualshive.com logo in svg

Canon FaxPhone L90, Basic Operation Manual

Share
Download
Canon FaxPhone L90 Basic Operation Manual Download Page 152

7-15

Maintenance

6

 

Hold the toner cartridge with one 
hand, and pull the seal completely 
out.

If toner is adhered on the removed seal, be 
careful that your hands or clothes do not 
get dirty from touching the toner.
If your hands or clothes get dirty 
from touching the toner, wash them 
immediately in cold water. Do not use 
hot water. If you do, the toner may be set 
permanently.

Do not pull the seal out at an angle.

–

–

7

 

Hold the toner cartridge by its 
handle (A).

Do not open the drum protective shutter 
on the toner cartridge. Print quality may 
deteriorate if the drum surface is exposed to 
light or is damaged.

Always hold the toner cartridge by its handle.

8

 

The arrow (A) on the toner 
cartridge should be facing away 
from you and pointing down.

Summary of Contents for FaxPhone L90























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands