Canon FAXPHONE L170, Basic Manual

Page: 68 / 197

S
peed Dialing
5
One-Touch Speed Dialing 5-4
Using One-Touch Speed Dialing
Once you have registered your numbers under One-Touch Speed Dial buttons, you can use them to send documents as
follows:
1
Load the document in the ADF.
For details on the types of documents you can fax, their requirements, and how to load documents, see “Document Requirements,” on
p. 6-1, and “Loading Documents in the ADF,” on p. 6-3.
2
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
3
Adjust any necessary settings for your document.
•
Press [Image Quality] to select the fax resolution. (See “Adjusting the Image Quality (Resolution),” on p. 6-4.)
•
Press [Exposure] to select the scan density. (See “Adjusting the Exposure (Density),” on p. 6-5.)
4
Press the One-Touch Speed Dial button assigned to the number to which you wish to fax.
•
The name registered under that One-Touch Speed Dial button is displayed. If no name is registered, the number registered under that
button will be displayed.
•
If you mistakenly press the wrong One-Touch Speed Dial button, press [Stop/Reset]
➞
press the correct button.
•
If no fax number is assigned to the One-Touch Speed Dial button you press, the LCD displays <NOT REGISTERED>. If this happens,
make sure you press the correct button and that the number you want to dial is registered under that button.
5
Press [Start].
•
If you do not press [Start] within 5 seconds of pressing the One-Touch Speed Dial button, the machine will begin sending automatically.
If you do not want the machine to send automatically, you need to change the <TIME OUT> setting. See p.15-9 for more details.
•
If an error occurs during sending, the machine will print an error report. If this happens, try sending the fax again. See “Faxing
Problems,” on p. 13-12 for details about errors.
NOTE
•
You can also use One-Touch Speed Dialing to send a document to more than one location at a time. For details, see “Group Dialing,” on
p. 5-8, and “Sequential Broadcasting,” on p. 6-12.
•
Changing image quality can affect transmission times.
T E L = 1 2 3 x x x x
0 4 C a n o n U S A
l-1100.book Page 4 Friday, February 27, 2004 7:04 PM