37
6
RE
CEIV
ING DOC
U
ME
NTS
Setting the receive mode
Receiving both documents and telephone calls
automatically: <Fax/Tel mode>
If you set <Fax/Tel> mode, you can control precisely how the fax handles incoming calls by adjusting the following
settings:
• Adjust the time the fax takes to check whether a call is from a fax machine or a telephone (<RING START TIME>
setting).
• Adjust the length of time the fax rings when the call is a voice call (<F/T RING TIME> setting).
• Set whether the fax switches to receive mode after the ring time set in <F/T RING TIME> has elapsed
(<DEFAULT ACTION> setting).
1
Press [Receive Mode], then press [Stop] to return to standby mode.
Every time you press [Receive Mode], the mode changes cyclically.
1
Press [Function], then press [Start/Copy].
2
Use [
] or [
] to select <RX SETTINGS>, then press [Start/Copy].
3
Use [
] or [
] to select <FAX/TEL AUTO SW>, then press [Start/Copy] twice.
4
Use the numeric buttons to enter the time the fax waits before ringing when
it receives a call, then press [Start/Copy] twice.
5
Use the numeric buttons to enter the time the fax rings while waiting for
someone to pick up the handset, then press [Start/Copy] twice.
6
Use [
] or [
] to select <RECEIVE> or <DISCONNECT>, then press [Start/Copy].
This setting tells the fax what to do if the handset is not picked up within the specified ring time set in step 5.
7
Press [Stop].
Setting ends and the fax returns to standby mode.
8SEC
22SEC
DISCONNECT
Thalia.book Page 37 Tuesday, September 28, 2004 10:13 AM
