Canon FAX-L380S Series, Service Manual

Page: 98 / 176

Chapter 3
3-46
F-3-321
3.5.5.9 Removing the SCNT Unit
0011-6348
/ / FAX-L390 / / / FAX-L380S
1) Remove the flat cable [1] on the SCNT board. As you disengage the claw
[2], remove the motor cover [3].
F-3-322
2) Remove the four connectors [1] and the flat cable [2].
3) Remove the five screws [3] and the SCNT unit [4].
F-3-323
3.5.5.10 Removing the Gear Unit
0011-4825
/ / FAX-L390 / / / FAX-L380S
1) Remove the two screws [1], and detach the drive plate (small) [2].
F-3-324
2) Remove the two gears [1].
3) As you disengage the claw, detach the gear unit [2].
F-3-325
3.5.5.11 Removing the Tooth-Missing Gear
0011-4826
/ / FAX-L390 / / / FAX-L380S
1) Remove the two screws [1], and detach the gear support [2].
F-3-326
2) Remove the spring [1].
3) As you disengage the claw, detach the tooth-missing gear [2].
F-3-327
3.5.5.12 Removing the Power Supply Shield Plate
0011-4827
/ / FAX-L390 / / / FAX-L380S
1) Remove the five screws [1] to remove the power supply shield plate [2].
[3]
[3]
[2]
[1]
[4]
[1]
[2]
[3]
[1]
[3]
[2]
[3]
[3]
[4]
[2]
[1]
[2]
[1]
[2]
[1]
[2]
[1]