Canon Fax-L260i, Service Manual

Page: 264 / 270

FAX-L260i 5.GUIDE TO REPLACEMENT 5-2
See Page
2-5
See Page
2-6
See Page
2-10
See Page
2-10
See Page
2-10
See Page
2-10
See Page
2-11
See Page
2-11
FIGURE 5-b FIGURE 6-a FIGURE 10-a FIGURE 10-b
FIGURE 10-c FIGURE 10-d FIGURE 11-a FIGURE 11-b
When removing the PRESSURE PLATE, use a fine
screwdriver to press the clips outward and unhook
them.
After attaching the PAPER FEED UNIT to the frame,
hook portions (a) into the slots as shown by the
arrows.
To attach the SWITCH LEVER ASS'Y: with portion
(a) lifted up, and while continuing to press upward
on pin (b), rotate the ass'y in the arrow's direction.
Attach the ACTUATOR BASE retaining clip to the
frame as shown by the arrow.
Do not loosen or remove the two black screws on
the SCANNER ASS'Y.
Attach the CABLE COVER by hooking the
projections into the slots as shown by the arrows.
Be careful not to pinch the cables (a).
Route the cables on the PCNT and PSU boards as
shown in the figure.
J402
J401
J203
J203~
FIXING FILM
J401~
READ MOTOR
J202
J401~
MAIN MOTOR
J402~
COVER SENSOR
J203~
LASER
J201
J201~
SCNT-J1
J203~
LASER
J201
J202~
PAPER SENSOR
SPEAKER~
SCNT-J3
J201~
SCNT-J8
a
SCREW
a
b
a
Be careful not to touch hte film on the FIXING ASS'Y
with your hands.
FILM