Canon Fax-L260i Service Manual Download Page 2

Page: 2 / 270

Application

This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation,

maintenance, and repair of products. This manual covers all localities where the products are sold. For this

reason, there may be information in this manual that does not apply to your locality.

Corrections

This manual may contain technical inaccuracies or typographical errors due to improvements or changes in products.

When changes occur in applicable products or in the content of this manual, Canon will release technical information

as the need arises. In the event of major changes in the contents of this manual over a long or short period, Canon

will issue a new editions of this manual.

The following paragraph does not apply to any countries where such provisions are inconsistent with local

law.

Trademarks

The product names and company names described in this manual are the registered trademarks of the individual

companies.

Copyright

reproduced or translated into another language, in whole or in part, without the written consent of Canon Inc.

CANON INC.

Office Imaging Products Technical Support Dept. 3

5-1 Hakusan 7-Chome, Toride-city, Ibaraki 302-8501, Japan

DTP System

This manual was produced on an Apple Macintosh

, personal computer, final pages were printed on AGFA

SelectSet Avantra 25.

All graphics were produced with MACRO MEDIA FREEHAND 8.0J

All documents and all page layouts were created with ADOBE Page Maker 6.5J

Summary of Contents for Fax-L260i













































































































































































































































































Search results

Summary of Contents for Fax-L260i

Reviews:

Related manuals for Fax-L260i

Brands by name

Popular brands

Canon Fax-L260i, Service Manual

Search results

Summary of Contents for Fax-L260i

Reviews:

Related manuals for Fax-L260i

Brands by name

Popular brands