Canon FAX L1000, Service Manual

Page: 68 / 610

2-12
FAX-L1000 Chapter 2: Operating Instructions
c) Reports output automatically (Memory clear report)
When this fax is turned on and the memory clear report is automatically printed out, the
image data which appears on the report is the data which was deleted without being able to
be backed up. After the memory clear report is printed, the image data management
information is automatically deleted.
Figure 2-9 Memory Clear List
TX/RX NO : Indicates four digits of the transaction number
MODE
: Displays the communication modes of TX, RX, polling TX,
timer TX, etc.
CONNECTION TEL/ID
: Displays the number and each digit (24 digits) of onetouch
speed dial and coded speed dial.
PGS. : Number of pages are stored in memory
SET TIME : Time when data is stored in memory (24-hour display)
ST TIME : Displays a start time for delayed TX, etc. (24-hour display)
SENDER NAME : Sender name appended to transmission (up to 24 characters)
Displays a 4-digit department code (only used when department
access code setup (
DAC SETUP
) is “
ON
” ).
*******************************
***
MEMORY CLEAR REPORT
***
*******************************
12/31/1999 11:52 FAX 833 4423 WORLD ESTATE,INC. 001
TX/RX NO MODE CONNECTION TEL/ID PGS. SET TIME ST. TIME SENDER NAME
0011 TRANSMIT [*002]HUNT INVESTMENTS 2 12/31 13:00 23:30 R.LOUIS
5011 CONFID. RX 1 12/31 14:46 -----
MEMORY FILES DELETED