Canon FAX-JX500, Service Manual

Page: 19 / 154

2-2-5 Communication Error
ERROR MEANING SOLUTION
Stop cancellation
TX/RX CANCELLED
During TX (sending): The memory
transmission reservation is cancelled.
During RX (receiving): The memory-
receiving image data is cleared.
Document jam
CHECK DOCUMENT
The document jam occurs.
Too long document
DOC. TOO LONG
The document is longer than 400 mm.
No answer
NO ANSWER
The other party does not transmit DIS.
Redial time-over
BUSY/NO SIGNAL
The redial becomes time-over, but DT
is not detected.
The other party without
paper
NO RX PAPER
The other party does not set any
paper.
No paper
LOAD PAPER
Any paper is not set. The printout is
not executed while receiving the FAX
simultaneously.
No telephone number.
NO TEL #
The one-touch speed dialing button or
coded speed dialing code you entered
has not been registered. Register the one-touch speed dialing
button or coded speed dialing code.
Memory full
MEMORY FULL
The fax
’
s memory is full because it
has received too many documents, or
a very long or detailed document.
Print any documents stored in
memory. Then start again.
The fax
’
s memory is full because you
either tried to send or copy too many
pages at once, or you tried to send or
copy a very long or detailed ocument,
using memory sending.
Delete any unnecessary data. Change
the scanning resolution. Attempt the
copying again.
Error other than above
TRY AGAIN
An error other than the above occurs.
Part 1 - 11