background image

5

26

SENDING DOCUMENTS

Preparing to send a document

Before you send a document, see Chapter 3: DOCUMENTS AND PAPER.

Adjusting the quality of your documents

Setting the scanning resolution

Resolution is a measure of the fineness or clarity of a printout. Low resolutions may cause text and graphics to have 
a jagged appearance, while higher resolutions provide smoother curves and lines, crisp text and graphics, and a better 
match to traditional typeface designs.

Setting the scanning contrast

Contrast is the difference in brightness between the lightest and darkest parts of a printed document. You can adjust 
the contrast your fax uses to send or copy documents, according to how light or dark your document is.

The higher the resolution, the higher the output quality, but the slower the scanning speed.

1

Load the document face up into the document tray (see p. 24). 

2

Press [Resolution] to select the resolution.

You can select STANDARD, FINE or PHOTO.
After about 5 seconds, the fax returns to standby mode.

You can change the resolution setting while the document is being scanned for sending. However, please note that your 
new setting will only be effective from the next page scanned.

1

Press [Function], then press [Start/Copy] twice.

2

Use [

] or [

] to select SCAN CONTRAST, then press [Start/Copy].

3

Use [

] or [

] to adjust the scanning contrast, then press [Start/Copy].

You can select STANDARD, DARKER or LIGHTER.

4

Press [Stop]. 

Setting ends and the fax returns to standby mode.

STANDARD

Summary of Contents for FAX-B840





































































Reviews: