20
Registering coded speed dialling numbers and
names
Use coded speed dialling to dial a fax number at the press of three buttons. A fax/telephone number can be registered
under each two-digit speed dialling code. You can also register the name of the party and a voice tag; the name
appears on the printout of the coded speed dialling list.
*
To delete the name and number registered under the coded speed dialling code, press [Clear] and [Start/Copy] after you perform
steps 1 to 4 above.
6
Register the party’s voice tag for UCanTalk (see p. 21).
When the fax asks you if you want to register the voice tag, press
or [#] to select YES or NO.
7
• If you selected NO in step 6, proceed to step 8.
• If you selected YES in step 6:
After the tone, speak the party’s name into the microphone.
The fax asks you to speak the party’s name again.
After the tone, speak into the microphone again.
8
To assign additional one-touch speed dialling numbers, start from step 3.
To finish, press [Stop].
If voice tag registration fails three consecutive times, registration will end. If this happens, start again from step 1.
1
Press [Function].
2
Use [
] or [
] to select TEL REGISTRATION, then press [Start/Copy].
3
Use [
] or [
] to select CODED SPEED DIAL, then press [Start/
Copy].
4
Use [
] or [
] to select the two-digit code (01-70) under which you want to register the
number.
If a number is already registered under this coded speed dialling code, the number is displayed on the LCD.*
5
Enter the party’s number and name the same way you registered them for one-touch speed
dialling.
See steps 4 to 5. Registering one-touch speed dialling numbers and names, p. 19.
6
Register the party’s voice tag the same way you registered it for one-touch speed dialling (see
above).
7
To assign additional coded speed dialling numbers, start from step 4.
To finish, press [Stop].
01=
