Canon EOS Rebel T2i EF-S 18-55mm IS Kit, Instruction Manual

Page: 74 / 134

73
1
2
3
4
5
Introduction
Contents at
a Glance
Basic
Operation
Advanced
Operation
Advanced
Image Editing
and Printing
Editing
JPEG/TIFF
Images
Index
Processing
Large Numbers
of Images
Reference
You can correct an image by pasting a section copied from another part
of the image to an unwanted part of the image.
1
Follow steps 1 to 3 in “Manually Erasing Dust (Repair
Function)”
(p.71)
.
2
Specify the section to be copied.
O
Click on the section that is to be the copy source while holding
down the <option> key.
O
To change the section that is to be the copy source, perform the
operation above again.
O
To fix the position of the copy source, checkmark [Fix Copy
Source position].
3
Correct the image.
O
Click or drag on the section you want to correct on the image. [ + ]
in the window indicates the copy source and [ ] indicates the
copy destination.
¿
The copied image is pasted in the position to which it was
dragged.
O
For [Pen type], you can select from [Brush] (the pasted image’s
borders simulate a brush) and [Pencil] (the pasted image’s
borders are sharp).
4
Click the [OK] button to return to the main window.
¿
The [ ] mark (p.114) is displayed on a corrected image.
Erasing Unwanted Parts of an Image (Copy Stamp Function)
Transferring a RAW Image to Photoshop
A RAW image can be converted to a TIFF image (16bit) and transferred
to Photoshop.
Only one image can be transferred at a time. To send multiple images at
a time, refer to
p.89 .
Setting Work Color Space
A different work color space (p.128) from the default settings (p.82) can
be set for each image.
If you set an image with a color space different to the default setting and
then subsequently change the default color space setting
(p.82) , this
default setting will not be applied and the individually set color space will
remain.
Since only the image processing conditions information changes, the
color space of a RAW image can be changed at any time.
Select the [Tools] menu [Transfer to Photoshop].
¿
Photoshop starts up and the transferred image is displayed.
A single image can be transferred at a time
O
Compatible versions of Photoshop are CS or later.
O
Transferred images are automatically converted to TIFF images
(16bit) to which an ICC profile
(p.127) is added. The ICC profile
contains information about [Preferences] (p.82) or work color
space set for each image as described below and the appropriate
color information is relayed to Photoshop.
O
When you quit Photoshop, only the original RAW image remains,
and the transferred image will disappear. Saving the transferred
image as a separate image in Photoshop is highly recommended.
Select the [Adjustment] menu [Work color space]
color space to be set.
A color space set individually does not change even when the
default setting is changed
The color space of a RAW image can be changed freely as
many times as required
COP
Y