Canon EOS M3 User Manual Download Page 133

Page: 133 / 201

133

Advanced Guide

Basic Guide

Camera Basics

Auto Mode /

Hybrid Auto Mode

Other Shooting Modes

Tv, Av, and M Mode

Playback Mode

Wi-Fi Functions

Set-Up Menu

Accessories

Appendix

Index

P Mode

Tv, Av, M, and C Modes

Before Use

●

Movie shooting is not available.

●

It may take longer than usual to focus on the subject.

●

Depending on the connection status, image display or shot timing
may be slower than usual.

●

Any jerky subject motion shown on the smartphone due to the
connection environment will not affect recorded images.

●

Captured images are not transferred to the smartphone. Use the
smartphone to browse and import images from the camera.

Shooting Remotely

As you check a shooting screen on your smartphone, you can use it to
shoot remotely.

●

Privacy settings must be configured in advance to allow all

images (

116,

135).

Secure the camera.

●

Keep the camera still by mounting it on a
tripod or taking other measures.

Connect the camera and

smartphone (

116).

●

In the privacy settings, choose [All
images].

Choose remote shooting.

●

Choose remote shooting in EOS Remote
on the smartphone.

●

Once the camera is ready for remote
shooting, a live image from the camera
will be displayed on the smartphone.

●

At this time, a message is displayed on
the camera, and all operations except
pressing the power button are disabled.

Shoot.

●

Use the smartphone to shoot.

Summary of Contents for EOS M3










































































































































































































Search results

Summary of Contents for EOS M3

Reviews:

Related manuals for EOS M3

Brands by name

Popular brands

Canon EOS M3, User Manual

Search results

Summary of Contents for EOS M3

Reviews:

Related manuals for EOS M3

Brands by name

Popular brands