117
Advanced Guide
Basic Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
Tv, Av, and M Mode
6
Playback Mode
7
Wi-Fi Functions
8
Set-Up Menu
9
Accessories
10
Appendix
Index
4
P Mode
5
Tv, Av, M, and C Modes
Before Use
Connecting via NFC When Camera Is in Playback
Mode
●
Press the [
] button to turn the camera
on.
●
Touch the smartphone with EOS Remote
installed (
N-Mark (
).
●
Press the [
][
][ ][ ] buttons to choose
an image to send, and then press the [
]
button. [
] is displayed.
●
To cancel selection, press the [
] button
again. [
] is no longer displayed.
●
Repeat this process to choose additional
images.
●
After you finish choosing images, press
the [
] button.
●
Press the [ ][ ] buttons to choose
[Send], and then press the [
] button.
●
The images are sent.
●
To disconnect, remove the [
] mark from
all the images, press the [
] button,
and then press [ ][ ] to choose [OK].
●
If during connection a message on the camera or smartphone
requests you to enter the nickname, follow step 2 in “Connecting
via NFC When Camera Is Off or in Shooting Mode” (
enter it.
●
The camera does not keep a record of smartphones you connect
to via NFC in Playback mode.
●
When using NFC, keep the following points in mind.
-
Avoid strong impact between the camera and smartphone. This
may damage the devices.
-
Depending on the smartphone, the devices may not recognize
each other immediately. In this case, try holding the devices
together in slightly different positions. If connection fails, keep
the devices together until the camera screen is updated.
-
Do not place other objects between the camera and
smartphone. Also, note that camera or smartphone covers or
similar accessories may block communication.
●
Select [All images] in step 3 when shooting remotely.
●
All images in the camera can be viewed from the connected
smartphone when you choose [All images] in step 3. Select
another option in step 3 to place restrictions on camera images
viewable from the smartphone (
registered a smartphone, you can change privacy settings for it
on the camera (
●
Connections require that a memory card be in the camera.
●
A message is displayed if the nickname you enter begins with
a symbol or space. Press the [
] button and enter a different
nickname.
