Canon EOS M2, Instruction Manual

Page: 34 / 364

34
Load a fully charged Battery Pack LP-E12 into the camera. The camera can
use an SD, SDHC, or SDXC memory card (sold separately). UHS-I Speed
Class SDHC and SDXC memory cards can also be used. The captured
images are recorded onto the card.
Make sure the card’s write-protect switch is set upward to enable
writing/erasing.
1
Open the cover.

Slide the cover as shown by the arrows
and open it.
2
Insert the battery.

The battery’s “ Canon ” logo must be
toward the camera’s front side as you
insert the battery with the battery
contacts in first.

Insert the battery until it clicks and locks
in place.
3 Insert the card.

The card’s label side must be toward
the front of the camera.

Insert it straight down until it stops.
4 Close the cover.

Press the cover until it snaps shut.
Installing and Removing the Battery and Card
Installing the Battery and Card
Write-protect switch