Canon EOS EOS 7, Service Manual

Page: 194 / 271

4) Press the RETURN key. When
communications ends, the screen on
the right is displayed. Check that the
room temperature (measured by the
Multiple Tool II, HS-I/F) and the
temperature measured by the
camera are within 5°C, then press
the RETURN key. If they are not
within 5°C, press the space bar, and
repeat the procedure from step 1).
Film Counter Reset
This item resets the film counter. The
film counter must be reset when the film
counter has been reset or is set to a
desired film count, for example, when the
shutter has been replaced.
When [F5] in the Data Transfer menu is
selected, the screen on the right is
displayed, and the counter is reset to “0”
(zero). The desired number of films can
also be set by pressing the ESC key.
Press the space bar to redisplay the Data
Transfer menu.
Part 4: Electrical Adjustment
4-46
TEMP3
Check that the difference between room temperature
and each sensor's is less than 5˚C.
If O.K., press RETURN.
If. N.G., press SPACE bar and readjust.
Temperature
Compensation
AE sensor
00.0˚C
Room
00.0˚C
TTL sensor
00.0˚C
CNTRST
Current film counter:
Check the number.
Press RETURN to return to DATA TRANSFER MENU.
Film Counter Reset
0000