Canon EOS 80D (W) Page 232 Instruction Manual Download

Page: 232 / 526

Using the Built-in Flash

232

FE (flash exposure) lock obtains and locks the appropriate flash
exposure for the desired part of the image.

Press the <

> button.



The built-in flash will be raised.



Press the shutter button halfway and
look in the viewfinder to check that
the <

> icon is lit.

Focus on the subject.

Press the <

> button

(

)



Aim the viewfinder center over the
subject where you want to lock the flash
exposure, then press the <

> button.



The flash will fire a preflash and the
required flash output is calculated
and retained in memory.



In the viewfinder, “

FEL

” is displayed

for a moment and <

> will light up.



Each time you press the <

> button,

a preflash is fired and the required
flash output is calculated and retained
in memory.

Take the picture.



Compose the shot and press the
shutter button completely.



The flash is fired, and the picture is
taken.

FE Lock



If the subject is too far away and beyond the effective range of the flash,
the <

> icon will blink. Move closer to the subject and repeat steps 2 to 4.



FE lock is not possible during Live View shooting.

Summary of Contents for EOS 80D (W)















































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS 80D (W)

Reviews:

Related manuals for EOS 80D (W)

Brands by name

Popular brands

Canon EOS 80D (W), Instruction Manual

Search results

Summary of Contents for EOS 80D (W)

Reviews:

Related manuals for EOS 80D (W)

Brands by name

Popular brands