Canon EOS 80D (W) Page 128 Instruction Manual Download

Page: 128 / 526

128

Autofocusing with 45 points is possible. All the AF area selection modes
are selectable.

: Dual cross-type AF point. Subject

tracking is superior and the focusing
precision is higher than with other AF
points.

: Cross-type AF point. Subject

tracking is superior and high-
precision focusing is achieved.

Lenses and Usable AF Points

Group A



Although the camera has 45 AF points,

the number of usable AF

points and focusing patterns vary depending on the lens. The
lenses are thereby classified into eight groups from A to H.



When using a lens in Groups E to H, fewer AF points will be usable.



See which group each lens belongs to on pages 132-135. Check
which group the lens in use belongs to.



The number of available AF points varies depending on aspect ratio
settings (p. 146).



When you press the <

> or <

> button, the AF points indicated by

the mark will blink. (The / AF points will stay lit.) Regarding
lighting up or blinking of the AF points, see page 123.



For the latest “Lens Group Designations” information, check the Canon
website.



Some lenses may not be available in certain countries or regions.

Summary of Contents for EOS 80D (W)















































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS 80D (W)

Reviews:

Related manuals for EOS 80D (W)

Brands by name

Popular brands

Canon EOS 80D (W), Instruction Manual

Search results

Summary of Contents for EOS 80D (W)

Reviews:

Related manuals for EOS 80D (W)

Brands by name

Popular brands