Canon EOS 760DW Instruction Manual Download Page 345

Page: 345 / 430

345

Digital Print Order Format (DPOF)

Sel.Image

Select and order images one by one.
By pressing the <

> button, you can

select images from a three-image
display. To return to the single-image
display, press the <

> button.

Press the <

> button to save the

print order to the card.

[Standard] [Both]

Press the <

> <

> keys to set the

number of copies to be printed for the
displayed image.

[Index]

Press <

> to add a checkmark to the

box <

>. The image will be included in

the index print.

Select [

Mark all in folder

] and select the folder. A print order for one

copy of all the images in the folder will be specified. If you select
[

Clear all in folder

] and select the folder, the print order for that

folder will all be canceled.

All image

If you select [

Mark all on card

], one copy of all the images on the

card will be set for printing. If you select [

Clear all on card

], the print

order will be cleared for all the images on the card.

Print Ordering

Quantity

Total images selected

Index icon

Checkmark

Note that RAW images and movies will not be included in the print order
even if you set [

] or [

All image

When using a PictBridge printer, print no more than 400 images for one
print order. If you specify more than this, all the images may not be
printed.

Summary of Contents for EOS 760DW















































































































































































































































































































































































































































Search results

Summary of Contents for EOS 760DW

Reviews:

Related manuals for EOS 760DW

Brands by name

Popular brands

Canon EOS 760DW, Instruction Manual

Search results

Summary of Contents for EOS 760DW

Reviews:

Related manuals for EOS 760DW

Brands by name

Popular brands