Canon EOS 4000D Instruction Manual Download Page 171

Page: 171 / 322

171

Shooting Video Snapshots

Cautions for Shooting Video Snapshots



You can add to an album only video snapshots with the same duration
(approx. 2 sec., 4 sec., or 8 sec. each).



Note that if you do any of the following while shooting video snapshots, a
new album will be created for subsequent video snapshots.
• Changing the [

Movie rec. size

] (p.166).

• Changing the [

Video snapshot

]’s shooting time (p.168).

• Changing the [

Sound rec.

] setting from [

Auto

]/[

Manual

] to [

Disable

]

or from [

Disable

] to [

Auto

]/[

Manual

] (p.176).

• Opening the card slot/battery compartment cover.
• Updating the firmware.



The sequence of snapshots in an album cannot be changed.



Video snapshots taken afterward cannot be added to an existing album.



The shooting duration of a video snapshot is only approximate.
Depending on the frame rate, the shooting duration displayed during
playback may not be exact.

Summary of Contents for EOS 4000D



































































































































































































































































































































Search results

Summary of Contents for EOS 4000D

Reviews:

Related manuals for EOS 4000D

Brands by name

Popular brands

Canon EOS 4000D, Instruction Manual

Search results

Summary of Contents for EOS 4000D

Reviews:

Related manuals for EOS 4000D

Brands by name

Popular brands