Canon EOS 1D MkII Instruction Manual Download Page 84

Page: 84 / 180

Select <

> on the LCD panel.

Hold down the <

> button and

turn the <

> dial to select <

Then let go of the button.

Focus the subject.

Look through the viewfinder and aim
the Area AF ellipse over the subject.
Then press the shutter button halfway.

The AF point which achieves focus
flashes briefly and the focus
confirmation light <

> in the

viewfinder lights at the same time.
At the same time, the green focus
confirmation light <

> in the

viewfinder is displayed.

The exposure setting will be displayed
on the LCD panel and in the
viewfinder.

Check the display.

The shutter speed and aperture value
will be set automatically and displayed
in the viewfinder and on the LCD
panel.

As long as the shutter speed is not
blinking, the exposure will be correct.

Take the picture.

Compose the shot and press the
shutter button completely.

Program AE

Summary of Contents for EOS 1D MkII





















































































































































































Search results

Summary of Contents for EOS 1D MkII

Reviews:

Canon EOS 1D MkII, Instruction Manual, Page: 84 / 180

Search results

Summary of Contents for EOS 1D MkII

Reviews: