Canon EOS 1D MkII Page 176 Instruction Manual Download

Page: 176 / 180

176

• Sound Recording

Recording method:

The voice annotation recorded with the built-in
microphone is attached to the image.

File format:

WAV

Recording time:

Max. 30 sec. per recording

• Direct Printing

Compatible printers:

CP Direct, Bubble Jet Direct, and PictBridge-compatible
printers

Printable images:

JPEG images
(Print ordering enabled with DPOF version 1.1)

• Customization

Custom Functions:

21 Custom Functions with 67 settings

Personal Functions:

Camera setting
saving/reading:

Possible

• Power Source

Battery:

One Ni-MH Pack NP-E3
* AC power can be supplied via the AC adapter and

DC coupler.

Number of possible shots: At 20°C/68˚F: Approx. 1200

At 0˚C/32˚F: Approx. 800
* The above figures apply when a fully-charged Ni-MH

Pack NP-E3 is used.

Battery check:

Automatic

Power saving:

Provided. Power turns off after 1, 2, 4, 8, 15, or 30 min.

Back-up battery:

One CR2025 lithium battery

• Dimensions and Weight

Dimensions:

156 (W) x 157.6 (H) x 79.9 (D) mm / 6.1 x 6.2 x 3.1 in.

Weight:

1220 g/43 oz. (body only. battery: 335 g/11.8 oz. )

• Working Conditions

Working temperature range: 0˚C - 45˚C / 32˚F - 113˚F
Working humidity:

85% or less

All the specifications above are based on Canon’s testing standards.

The camera’s specifications and physical appearance are subject to change
without notice.

Summary of Contents for EOS 1D MkII





















































































































































































Search results

Summary of Contents for EOS 1D MkII

Reviews:

Related manuals for EOS 1D MkII

Brands by name

Popular brands

Canon EOS 1D MkII, Instruction Manual

Search results

Summary of Contents for EOS 1D MkII

Reviews:

Related manuals for EOS 1D MkII

Brands by name

Popular brands