Canon EOS 10D Digital Page 110 Instruction Manual Download

Page: 110 / 184

110

Nine thumbnail images are displayed on one screen.

Index Display

Set the camera to the playback mode.

•

Press the <

> button.

The last captured image will appear on the LCD
monitor.

Display the index.

•

Press the <

> button.

The selected thumbnail will be highlighted with a
green border.

Select an image.

•

Turn the <

> dial counterclockwise to select the

preceding (older) image.

•

Turn the <

> dial clockwise to select the next

(newer) image.

From the index display, switch to any
other display mode.

•

To display a single image, press the <

> button.

•

To display the image with shooting information,
press the <

> button.

•

Pressing the <

> button switches to the single

image displaay and pressing it again switches to
magnified view. (

→

p.111)

While the index is displayed, press the <

> button and turn the <

> dial to jump

nine images ahead or back. (

→

p.112)

Image Playback

Summary of Contents for EOS 10D Digital

























































































































































































Search results

Summary of Contents for EOS 10D Digital

Reviews:

Related manuals for EOS 10D Digital

Brands by name

Popular brands

Canon EOS 10D Digital, Instruction Manual

Search results

Summary of Contents for EOS 10D Digital

Reviews:

Related manuals for EOS 10D Digital

Brands by name

Popular brands