90
DV Dubbing
You can input video from other digital video devices via the DV terminal, and record the
input video on the tape in the camcorder. You can also record the input video as a movie
or still image on a memory card.
Connecting
Check the type and orientation of the DV terminal and make sure you connect the DV
cable properly. Refer also to the instruction manual of the connected device.
Dubbing
Available only in the
mode.
1. Load a blank cassette in this camcorder.
If “AV
DV” is displayed, change the setting (
93).
2. Connected device: Load the recorded cassette or disc.
3. Open the FUNC. menu, select (
) the record pause icon
and
press (
).
4. Select (
) [EXECUTE] and press (
) to start the search.
5. Connected Device: Play back the tape or disc.
In record pause mode and during recording, you can check the picture on the screen.
6. If the joystick guide does not appear on
screen, press (
) to display it.
7. Push the joystick (
) towards
/
when the
scene you wish to record appears.
• Recording starts.
• Push the joystick (
) towards
/
again to pause/resume the recording.
8. Push the joystick (
) towards
to stop recording.
9. Connected Device: Stop playback.
Recording the Input Video on a Memory Card
The size of the still image recorded on the memory card will be
S
640 x 480. The still
image quality and the movie size can be selected.
Available only in the
mode.
Signal flow
Commercially available DV cable
Digital video device
(e.g. camcorder)
Output
Open the LCD panel
