74
Returning to a Pre-marked Position
If you wish to return to a particular scene later, mark the point with the zero set memory
and the tape will stop at that point when you rewind/fast forward the tape.
Available only in the
and
modes.
1. During recording or playback, press the ZERO SET MEMORY button
on the wireless controller at the point you wish to return to later.
• “0:00:00
” appears.
• To cancel, press the ZERO SET MEMORY button again.
2. If you were playing back a tape, rewind the tape. If you were recording,
after you finish turn the
switch to PLAY and then rewind the
tape.
• “
” appears.
• The tape stops automatically at “0:00:00
”.
• The tape counter changes to time code.
If the time code has not been recorded consecutively, the tape may not stop
correctly at the scene marked with the zero set memory.
