Canon EF-9, Service Manual

Page: 28 / 54

3) With a flat nosed screwdriver, unfasten
the snaps on both sides. Remove the
upper cover and spring.
➀
Snaps
➁
Upper cover
Figure 3-2-6
Notes: 1. Ensure that the separation
guide and upper cover are
removed as one unit. However,
in the event that the separation
guide has already been removed,
be sure to follow the position
adjustment directions (refer to
Page 4-8) when re-installing.
2. Check that the separation roller
pressure spring is correctly
installed when reassembling.
➀
Separation roller pressure spring
Figure 3-2-7
5. Removal of the Envelope Side
Guides
➀
Left front guide
➁
Left rear guide
➂
Right rear guide
➃
Right front guide
Figure 3-2-8
1) Remove the rear, front, lower and upper
covers.
2) Remove the 6 screws and take out the
guides from underneath.
➀
Screws
Figure 3-2-9
3 - 4
CHAPTER 3
➁
➀
➀ ➁
➃
➂
➀
➀