83
E
?
There is an echo on the sound.
➜
If you are using speakers, depending on the volume and microphone
sensitivity, the sound from the speakers may be picked up by the
microphone, producing an echo. Change the direction or volume of the
microphone, or move the camcorder away from the speakers. We
recommend using headphones instead of speakers.
?
Cannot set the sound to mute.
➜
Sound may still be send to your contact even if the microphone volume lever
is moved completely to the left and the volume lever indicates that it is set to
mute. Move the lever to the right and back to the left; no sound should be
sent to your contact now.
?
There are anomalous noises when the tape is set to playback pause or
played back using playback control.
➜
Depending on the camcorder, Windows Messenger may produce anomalous
noises such as buzzing sound when you pause playback or use playback
control.
?
The operations [Stop Camera] or ending a conversation take time.
➜
It may take time if you are connecting using a USB cable.
?
Can‘t operate the camcorder.
➜
If you cannot operate the camcorder of your contact, your contact may not
allow remote control.
➜
Check if the camcorder is correctly connected to the computer.
➜
Camcorder without NETWORK mode: If the Canon camcorder is set to
CAMERA mode, some camcorders will enter the demonstration mode after a
certain time. During demonstration, you may not be able to operate the
camcorder from the DVM panel. Operate the zoom lever on the camcorder
to cancel the demonstration.
