36
• Always make sure that the ink on a document is dry before scanning
it. Scanning documents with the ink still wet may soil the rollers or
scanning glass, cause lines or smudges to appear on images, or
dirty other documents.
• Always clean the rollers or scanning glass after scanning a
document written in pencil. Scanning documents with pencil written
on them may soil the rollers or scanning glass, cause stripes to
appear in images, or dirty other documents.
• When scanning a two-sided document that is printed on thin paper,
the image on the opposite side of each page may show through.
Adjust the background color and scanning brightness from the
application program before scanning.
• Note that scanning the following types of documents can cause a
paper jam or malfunction. To scan such a document, make a
photocopy of the document and then scan the photocopy.
• To scan bound multi-page documents such as invoice booklets,
place the bound edge against the feeder inlet and scan by manual
feeding.
• To use the Long Document Mode, feed document pages manually,
one after another.
Long Document Mode Setting
Using the Long Document mode, pages up to 118.1" (3 m) long can
be scanned with automatic paper size detection. You can set the Long
Document Mode setting from the User Mode.
1
Press the Menu key on the control panel.
The User Mode is activated.
2
Press the [
] key five times to display Long Document
Wrinkled or creased
documents
Carbon paper
Curled documents
Coated paper
Torn documents
Extremely thin,
translucent paper
Documents with
paper clips or staples
Menu Key