background image

Bluetooth Low Energy Scan Handle

Models SH-BLE-CT50, SH-BLE-75e

Quick Start Guide

BTLE-SH-MULT-QS-01 Rev A
6/16

*CT50-ND-MULT-QS*

Out of the Box

Make sure that your shipping box contains these items: 

Bluetooth Low Energy (BLE) Scan Handle (SH-BLE-CT50 or 
SH-BLE-75e) 

Quick Start Guide 

If any of these items are missing or appear damaged, contact your Customer 
Account Representative. Keep the original packaging in the event that you 
need to return the scan handle for service or if you want to store it while not 
in use.

The BLE scan handle was designed to allow access to all of the buttons and 
the touch panel of the mobile computer. You can use the mobile computer 
inserted into the scan handle with the Scan Handle Holster. If you need to set 
the mobile computer inserted into the scan handle down on a flat surface, 
you can place the combination nose down.

The scan handle can operate under all of the same environmental conditions 
as the mobile computer. The operating temperature is -20 °C to 50 °C (-4 °F 
to 122 °F).

Caution: We recommend the use of Honeywell accessories and power 
adapters. Use of any non-Honeywell accessories or power adapters 
may cause damage not covered by the warranty.

Mise en garde : Il est recommandé d'utiliser les périphériques, les 
cordons d'alimentation et les adaptateurs secteur conçus par 
Honeywell. L'utilisation de tout périphérique, cordon d'alimentation ou 
adaptateur secteur d'une autre marque est susceptible de provoquer 
des dommages non couverts par la garantie.

Download and Install the Scan Handle Tool

You can download the Scan Handle Tool from the Honeywellaidc website at 
www.honeywellaidc.com.

Attach the Scan Handle to the CT50

No special tools are required to attach the scan handle to the computer. 

Slide the computer into the scan handle until it clicks firmly in place. 

      

Attach the Scan Handle to the D75e

No special tools are required to attach the scan handle to the computer. 

1. Press in on the rounded part of the release tabs on each side of the scan 

handle base.

2. Slide the computer into the scan handle.

3. Press firmly on both sides of the scan handle locking bar to secure the 

scan handle to the computer. 

Scan a Bar Code with the Scan Handle

The scan handle makes it easy to scan a bar code with the computer. The 
scan handle does not interfere with the ability to hear a beep on a good read.

Pull on the handle trigger to scan a bar code.

Remove the Computer from the Scan Handle

If you need to replace the battery, you will need to remove the computer from 
the scan handle:

Press in on the bottom of both scan handle latches and slide the computer 
out of the handle.

Replace the Scan Handle Batteries

There are two AA alkaline batteries in the scan handle that you will need to 
change periodically.

Reviews: