background image

Setup Guide

Please read first.

Checking the Accessories

If any of the items listed below are missing or damaged, contact your local authorized 
Canon dealer or service representative.

• Items included in this manual are subject to change 

without notice.

• You must keep the machine’s packaging and packing 

materials for storing or transporting the machine.

Installing the Feed Roller

1

Slide the document guides to the left 
and right, and open the roller cover.

2

Lift the roller fixing lever 

a

, and slide it to the left 

b

.

3

Insert the feeding roller and align the 
notch on the roller with the shaft on 
the unit.

4

Slide the roller fixing lever to the right and insert it into the hole on the left of 
the feeding roller 

a

. Lower the roller fixing lever to secure the shaft of the 

feeding roller 

b

.

5

Close the roller cover. It is properly 
closed when you hear a click.

6

Gently press on the sides of the front 
unit to close it. It is properly closed 
when you hear a click.

Document 
guides

Roller cover

Roller fixing lever

DR-2010M/DR-2510M

Feed Roller

USB Cable Type A/Type B

(Length: 1.8 m)

AC Adapter/Power Cord

(Connected length: 2.6 m)

Reference Guide

(this document)

Setup Disc

Third-Party Software

The following software is included on the supplied Setup disc.

Presto! BizCard

Business card management software from NewSoft Technology Corp.
Run the following installer from the Setup disc to install.

BizCard/BCRInstaller

Presto! PageManager

Photo and document management software from NewSoft Technology 
Corp.
Run the following installer from the Setup disc to install.

PageManager/PM8Installer

* Presto! BizCard is a registered trademark of NewSoft Technology Corp.

Remove the scanner from the box, and remove the orange tape and protective sheets (

) from the scanner.

 Continued on back side

Although this manual uses the DR-2510M in the descriptions, DR-2010M operations are identical. If you are using the DR-2010M, please read 
“DR-2010M” in place of “DR-2510M.”

Registration Card

(U.S.A and Canada only)

Warranty Card

(U.S.A and Canada only)

Summary of Contents for DR-2510M - imageFORMULA - Document Scanner





































Reviews: