manualshive.com logo in svg

Canon Digital Elph SD500, User Manual, Page: 72 / 195

Share
Download
Canon Digital Elph SD500 User Manual Download Page 72

70

Shooting Close-Ups/  Infinity Shots

To cancel the macro/infinity mode

Press the

/

button to remove 

 or 

 from the display.

Macro

Use this mode to record subjects in the range of 5 to 50 
cm (2.0 in. to 1.6 ft.) from the end of the lens at the 
maximum wide angle setting and in the range of 30 to 50 
cm (1.0 to 1.6 ft.) at the maximum telephoto setting.

Infinity

Use this mode to record landscapes and distant subjects.
It can also be used for compositions combining both 
near and distant subjects.





–



U



–



–



U











–





–











–





–





Setting available    

U

Can be selected for the first image only

1

Press the 

 / 

 button to select 

the macro/infinity mode.

The selected macro/infinity mode appears 
on the LCD monitor.

Summary of Contents for Digital Elph SD500




































































































































































































Reviews:

No comments