Canon Digital Elph SD500 Page 24 User Manual Download

Page: 24 / 195

Installing the Battery Pack

Install Battery Pack NB-3L (supplied).

Please recharge the battery pack (p. 19) before you use it for the first
time.

Slide the SD card slot/battery cover
in the direction of the arrows.

Press the battery lock while
inserting the battery pack all the
way in until the lock clicks.

Align the

on the battery pack and

battery chamber and insert it correctly.

To remove the battery pack, press the
battery lock in the direction of the arrow and
hold it while pulling the battery pack out.

Slide the SD card slot/battery cover
closed.

Battery Lock

Symbol

Summary of Contents for Digital Elph SD500




































































































































































































Search results

Summary of Contents for Digital Elph SD500

Reviews:

Related manuals for Digital Elph SD500

Brands by name

Popular brands

Canon Digital Elph SD500, User Manual

Search results

Summary of Contents for Digital Elph SD500

Reviews:

Related manuals for Digital Elph SD500

Brands by name

Popular brands