Canon Digital Elph SD500, User Manual

Page: 165 / 195

163
Li
st o
f Mes
sages
RAW You attempted to play back a RAW image.
Unidentified Image You attempted to play back an image that was
recorded in a special data type (proprietary data
type used by the camera of another
manufacturer, etc.) or a movie clip recorded by
another camera.
Cannot magnify! You attempted to magnify an image recorded in a
different camera or data type, an image edited
with a computer, or a movie.
Cannot rotate You attempted to rotate an image recorded in a
different camera or data type, an image edited
with a computer, or a movie.
Incompatible WAVE format. A sound memo cannot be added to this image
since the data type of the existing sound memo is
incorrect.
Cannot register this image! You attempted to add a start-up image or a movie
that was created with another camera.
Protected! You attempted to erase a protected image or
movie.
Too many marks. Too many images have been marked with print
settings or transfer settings. Cannot process any
more.
Cannot complete! Could not save the print or transfer settings.
Unselectable image. You attempted to set the print settings for a non-
JPEG image.
Exx (xx: number) Camera malfunction. Turn the
power off and then back on, then shoot or play
back. A problem exists if the error code
reappears. Note the number and contact your
Canon Customer Support Help Desk. If an error
code displays directly after taking a picture, the
shot may not have been recorded. Check image
in playback mode.