Trouble?
99
Ad
di
tio
n
al In
for
m
ati
o
n
Recording
Even without a disc loaded,
when closing the disc
compartment cover a motor
sound can be heard.
The camcorder is checking if a disc is loaded or not. This is not a
malfunction.
–
The disc cannot be ejected.
Turn off the camcorder, disconnect the compact power adapter
and remove the battery pack. Restore the power supply and try
again.
–
The camcorder has exceeded its operational temperature. Turn
off the camcorder and let it cool down before resuming use.
The disc cannot be recognized. The disc is dirty. Clean the disc with a soft lens-cleaning cloth. If
the problem persists replace the disc.
108
The disc is not correctly loaded. Check the disc.
26
Verify that the camcorder supports the type of DVD disc you
inserted.
5
The camcorder vibrates.
Depending on the condition of the disc, the camcorder might
vibrate occasionally. This is not a malfunction.
–
• The disc’s rotation can be
faintly heard.
• Occasionally the operation
sound can be heard.
The disc is activated from time to time. This is not a malfunction.
–
After using the camcorder for a
long time, “
” lights up in red.
This is not a malfunction. Turn the camcorder off and let it cool
for a while before resuming operation.
–
“ ” flashes red on the
screen.
The camcorder malfunctions. Consult a Canon Service Center.
–
Problem
Solution
Image will not appear on the
screen.
Set the camcorder to
.
34
“SET THE TIME ZONE, DATE
AND TIME” appears on the
screen.
Set the time zone, date and time.
32
Recharge the built-in lithium battery and set the time zone, date
and time.
109
Pressing the start/stop button
will not start recording.
Set the camcorder to
.
34
Load a recommended disc.
6
The disc is full (“
END” flashes on the screen). Delete some
recordings (DVD-RW in VR mode) to free some space or
replace the disc.
26
69
The camcorder has exceeded its operational temperature. Turn
off the camcorder and let it cool down before resuming use.
–
Remove the disc protection.
71
Unfinalize the disc (DVD-RW in VIDEO mode).
79
Even after stopping recording,
the disc access indicator does
not go off.
The scene or still image is being recorded on the disc. This is
not a malfunction.
34
36
Problem
Solution
D119_NTSC-E.book Page 99 Monday, December 18, 2006 10:14 AM
