Canon DADF-P1, Service Manual

Page: 59 / 90

Chapter 3
3-19
F-3-119
3.4.9.2 Removing the Feeder Cover
0010-6615
1) Remove the screw [1] and positioning pin [2], and then detach the feeder
cover [3].
F-3-120
3.4.9.3 Removing the Rear Cover
0010-6624
1) Open the feeder cover.
2) Move to the back of the machine, remove the two screws [1], and then
detach the rear cover [2].
F-3-121
Remove the rear cover with the two claws [3] released.
3.4.9.4 Removing the ADF Driver PCB
0011-3236
1) Disconnect all connectors from the ADF driver PCB. (10 connectors)
2) Remove the two screws [1], and then remove the ADF driver PCB [2].
F-3-122
3.4.9.5 Removing the Pickup Motor
0010-6638
1) Disconnect the connector [1], and then remove the tension spring [2].
2) Remove the two screws [3], and then remove the pickup motor [4]
together with the adjusting plate.
F-3-123
3.4.9.6 Removing the Feed Motor
0010-6646
1) Disconnect the connector [1], and then remove the tension spring [2].
2) Remove the two screws [3], and then remove the feed motor [4] together
with the adjusting plate.
F-3-124
3.4.9.7 Removing the Timing Belt
0010-6653
1) Remove the screw [1], and then disconnect the ground cable [2].
[3]
[4]
[3]
[2]
[1]
[1]
[3]
[2]
[2]
[1]
[3]
[4]
[1] [3]
[2]
[1] [4]
[2]
[3]